Dino-Lite AM311ST Tips

Hide thumbs Also See for AM311ST:

Tips to install the driver for Dino-Lite Plus series in Windows 10

Part A:

To work the Dino-Lite AM311ST in Windows 10, you will need to disable the

Driver Signature Enforcement before installing the driver for AM311ST.

Use the following steps to disable driver signature enforcement.

1. Click the

Start

2. Click Update and Security.

3. Click on Recovery.

4. Click Restart now under Advanced Startup.

5. Once your Computer has rebooted, you will need to choose the

Troubleshoot option

6. Click Advanced options.

7. Click Startup Settings.

8. Click on Restart.

9. On the Startup Settings screen press 7 or F7 to disable driver

signature enforcement.

Part B:

1. Your computer will restart and now you will be able to install driver.

2. Download the driver "Dino-Lite Plus", the driver can be found at

https://www.dino-lite.com/download01.php

3. Click the "dnldrv34.exe" to install the driver. You will need to click the

dnldrv34.exe again if the following popup window appeared during the

driver installation.

4. During the installation, Windows will inform you that it can't verify the

publisher of this driver software. Choose "Install this driver software

anyway" to complete the installation.

and select Settings.

Table of Contents

Need help?

Do you have a question about the AM311ST and is the answer not in the manual?

Page 1 Tips to install the driver for Dino-Lite Plus series in Windows 10 Part A: To work the Dino-Lite AM311ST in Windows 10, you will need to disable the Driver Signature Enforcement before installing the driver for AM311ST. Use the following steps to disable driver signature enforcement.
Page 2 5. Connect the Dino-Lite to the USB port to start DinoCapture2.0 Part C: If you still have problem using Dino-Lite, please check if the device driver is in a problem state. 1. Open the Device Manager 2. Under the Imaging devices list, device that marked with a symbol of black “!”...
Page 3 4. Then select Search for drivers in this location by Browse C:\Program Files(x86)\Common Files\snp2std) 5. Then select the Let me pick from a list of device drivers on my computer option, and then press “Next” button.
Page 4 7. A Windows Security dialog similar to the screenshot should popup. Select “Install this driver software anyway” to continue the installation. 8. You are now able to use the Dino-Lite after the installation completed. Note: If you restart your computer again the driver signature enforcement...