Care And Cleaning - Dometic WMD 1050 User Manual

Hide thumbs Also See for WMD 1050:
Table of Contents

Advertisement

12
Programme/ Tem-
perature
DRAIN
SPIN
/OFF
1) If you select this option, we recommend that you reduce the maximum load. Recommended load for cotton is 2
kg.
This option cannot be selected together with Economy option.
2) Available at the temperature 60° and 40°.
3) Available at the temperature 60°.

Care and cleaning

Important! You must DISCONNECT the
appliance from the electricity supply, before
you can carry out any cleaning or
maintenance work.
Descaling
The water we use normally contains lime. It
is a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder manu-
facturer's instructions. This will help to pre-
vent the formation of lime deposits.
Maintenance Wash
With the use of low temperature washes it
is possible to get a build up of residues in-
side the drum.
We recommend that a maintenance wash
be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash pro-
gramme.
• Use a normal measure of detergent,
must be a powder with biological proper-
ties.
Type of laundry
For emptying out the
water of the last rinse
in programmes with
the Rinse Hold or No
spin option selected.
Separate spin for hand
washed garments and
after programmes with
the Rinse Hold option
selected. You can
choose the spin speed
by turning the spin
speed selector to
adapt it to the fabrics
to be spun.
For resetting the pro-
gramme or switching
the machine off
Options
SPIN REDUCTION
External cleaning
Clean the exterior cabinet of the appliance
with soap and water only, and then dry
thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispens-
er drawer should be cleaned regularly.
1. If necessary, the whole detergent draw-
er can be taken out of the machine for
cleaning. You need to pull it firmly out-
wards, so that it comes free of retaining
stop.
Description of the
programme
Draining of water
Max Load 3 kg
Drain and long spin
Max. spin speed 1000
rpm
Max Load 3 kg

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents