Nokia Go Earbuds2+ Quick Start Manual page 4

2. Pair and connect with Bluetooth
2.1 Pairing with the device
2.1a Turning on and pairing:
When you take the earbuds out from the charging case, the earbuds will turn on
and pair with each other automatically. When they have successfully paired, the
LED indicator light of the right earbud will flash blue and red alternately and the
earbuds are ready to connect with your Bluetooth
2.1b Connecting with your
Bluetooth device:
Turn on Bluetooth in your device
and choose "Nokia TWS-122" from
the Bluetooth menu to connect.
During the connection process,
the LED indicator light on the
right earbud will flash blue and
red alternately.
The LED indicator lights of the
earbuds will flash blue every 10
seconds when they are successfully
connected via Bluetooth.
2.2 After the initial pairing, the earbuds will automatically connect with your
Bluetooth device whenever taken out of the charging case.
2.3 The earbuds will automatically power off if there is no Bluetooth connection
within 5 minutes.
device.
®
3
Nokia TWS-122