Table of Contents
Advertisement
Available languages
Available languages
36
What to do if...
Problem
The temperature in the
refrigerator is too high.
Upper or lower square is
shown in the temperature
Display.
dEMo appears on the
Display.
Replacing the lamp
1.
Switch off the appliance.
2.
Press on the rear hook and at the same
time slide the cover in the direction of
the arrow.
3.
Replace the lamp with one of the same
power and specifically designed for
household appliances. (the maximum
power is shown on the lamp cover).
4.
Install the lamp cover by sliding it into
its original position.
5.
Switch on the appliance.
6.
Open the door. Make sure that the light comes on.
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "Installation".
3.
If necessary, replace the defective door gaskets. Contact the Service Center.
Possible cause
There is no cold air circulation in
the appliance.
An error has occurred in meas-
uring the temperature.
The appliance is in demonstra-
tion mode (dEMo).
Solution
Make sure that there is cold air
circulation in the appliance.
Call your service representative
(the cooling system will continue
to keep food products cold, but
temperature adjustment will not
be possible).
Keep pressed approximately 10
sec. the OK button since a long
sound of buzzer is heard and the
Display shut off for a short while:
appliance start works regularly.
Advertisement
Table of Contents
