JVC KD-X375BT Instruction Manual page 32

Display Settings
[DISPLAY]
[DIMMER] Dims the illumination.
[OFF]: Dimmer is turned off. Brightness changes to [DAY] setting.
[ON]: Dimmer is turned on. Brightness changes to [NIGHT] setting.
(See the following "[BRIGHTNESS]" settings.)
[DIMMER TIME]: Set the time to turn on dimmer and to turn off dimmer.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: [18:00] ; [OFF]: [6:00])
[DIMMER AUTO]: Dimmer turns on and off automatically when you turn off
or on the car headlights.*1
[BRIGHTNESS] Sets the brightness for day and night separately.
1 [DAY]/[NIGHT]: Select day or night.
2 Select a zone. (See the illustration on the left column.)
3 [LEVEL 00] to [LEVEL 31]: Set the brightness level.
[TEXT SCROLL]*2 [SCROLL ONCE]: Scrolls the display information once. ;
[SCROLL AUTO]: Repeats scrolling at 5-second intervals. ;
[SCROLL OFF]: Cancels.
[FORMAT]
*3 The information below is shown on the secondary display when a Bluetooth
device is connected. (Page 28)
[BATT/SIGNAL]: Displays the battery power and signal strength. ;
[DATE]: Date display.
26 ENGLISH
Default: [XX]
[COLOR]
[PRESET] Select illumination colors separately for buttons in different zones.
1. Zone selection ([ZONE 1], [ZONE 2], [ALL ZONE]). (See the illustration
on page 25.)
2. Select a color for the selected area.
• [COLOR 01] to [COLOR 49]
• [USER]: The color you created for [DAY COLOR] or [NIGHT COLOR] is displayed.
• [COLOR FLOW01] to [COLOR FLOW03]: The color changes at different speeds.
• [CRYSTAL]/[FLOWER]/[FOREST]/[GRADATION]/[OCEAN]/[RELAX]/
[SUNSET]: The selected color combination is displayed.*4
(Available for selection only when the option is selected in step 1 [ALL ZONE].)
Save your own day and night lighting colors for different areas.
[DAY COLOR]
1 Zone selection ([ZONE 1], [ZONE 2]). (See illustration on page 25.)
2 [RED]/[GREEN]/[BLUE]: Select the base color.
3 [00] to [31]: Select the level.
Repeat steps 2 and 3 for all primary colors.
• Your setting is stored to [USER] in [PRESET].
[NIGHT COLOR]
• [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your
[ON]: When settings are made in the menu and list search, the illumination
[MENU GUIDE]
color of [ZONE 1] and [ZONE 2] changes to white except in color setting
mode. ; [OFF]: Cancel.
*1 Dimmer wire connection required. (Page 33)
*2 Some letters or symbols will not be displayed correctly (or will not be displayed) on the display.
*3 Operation depends on the type of telephone used.
*4 When one of these color combinations is selected, the illumination colors of [ZONE 1] and [ZONE 2]
change to the default colors.
car's headlights.