Radio - JVC KD-X375BT Instruction Manual

Getting Started
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK]
[TIME SYNC] [ON]: The clock time is automatically set using the Clock Time (CT) data in
FM Radio Data System signal. ; [OFF]: Cancels.
[CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned
off. ; [OFF]: Cancels.
[ENGLISH]
[PУССКИЙ]
Select the display language for menu and music information if applicable.
[ESPANOL]
By default, [ENGLISH] is selected.
[FRANCAIS]
[ON]: Activates the display demonstration automatically if no operation is
[DEMO MODE]
done for about 15 seconds. ; [OFF]: Deactivates.
6 ENGLISH

RADIO

"STEREO" lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2
Press to search for a station automatically.
(or)
Press and hold until "M" flashes, then press
repeatedly to manually search for a station.
Settings in memory
You can store up to 18 stations for FM, 6 stations for FM-LO and
6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and "MEMORY‚ appears.