Abexo RM620 Manual page 7

RM620
The LED on the detector front panel (Fig. 2-B) will indicate the detection of a movement,
for all the time the relay is excited.
A
Fig.1
Wire colour Description
Red 12-24 V
Black 12-24 V
Green COM relay contact
Yellow NO contact (when device is not powered)
Blue NC contact (when device is not powered)
Tab.1
RELAY CONTACT SETTING
RM620 has a relay with switching contact.
According to the setting of the dip-switch 3 (Fig. 1-B) in the lower section of the detector,
the combinations described in table 2 can be obtained.
These conditions are valid when the device is powered.
E F B
Fig.2
AC/DC
AC/DC
www.abtecno.com
ENGLISH
B A
www.aperioaccess.it
7
7