Power On; Self-Inspection; Image Adjustment - Konix D27VA240A2 User Manual

A

2.4 Power on

Turn on the monitor and computer,and then indicator will light green (or blue)
when the screen is under normal condition. Please check to see if there is any
wrong with the connection of video signal cable if the indicator lights red.

2.5 Self-inspection

If the monitor inspects there is no horizontal and vertical signal, it will prompt
to check the video input, please refer to the illustration below, and the
monitor will enter into power saving mode
after several seconds, the indicator will
light red. The screen will restore to normal
display once receiving video signal.

2.6 Image Adjustment

Please adjust the image according to your need; please refer to the
"Operation" in Section Three.
9