Technical Characteristics - Taxitronic TX52 Installation Manual

4. TECHNICAL CHARACTERISTICS

The general technical characteristics of TX52 / TX40 are as follows:
− Power supply voltage
− Maximum consumption without external lights = 1000 mA
− Maximum consumption taximeter off = 10 mA
− Maximum consumption inside battery = 5 A
− Maximum power 36 W for each external light of 60 W in case that 3 outputs are
connected in parallel.
− Impulse generator power supply = 5 V
Impulse generator input signal:
level 1 = from 4 to 25 V
− Maintenance of the information disconnected from the vehicle's battery = 5 years
− 40 V surges of 10 ms.
− Resistance to electrostatic shocks of 6 kv (Contact), 8 kV (Air).
− Protection against inverse connection
− TX52:
− Internal connector protective fuse of 1.85 A.
− Internal electronics protective fuse of 1.5 A.
− Internal battery protective fuse of 0.1 A.
− TX40:
− Internal connector protective fuse of 1.85 A.
− Internal battery protective fuse of 0.1 A.
− External fuse of 4 A.
− Operational temperature:
− TX52:
− TX40:
− Storage temperature for keeping the information - 40 to + 85º C
TX52C
TX52S
TX40
− "K" constant of the device from 500 until 80000 pulses per Km/ml.
− Mechanical environment M3
− Climatic environment E3
Inst TX52_TX40_007_en.doc
Nominal = 12 V
Max = 30 V
Min = 8 V
level 0 = -1 to 2,5 V
-10 to +70ºC
-25 to +70ºC
Wide
153
153
180
INTERFACOM, S.A.
High Deep
78
72
50
59
36
32
12