Advertisement
Available languages
Available languages
8 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates, rubber and
laminate/HPL (High Pressure Laminate) while resting firmly
on the workpiece. It is suitable for straight and curved cuts
with mitre/bevel angles of up to 45°. The saw blade recom-
mendations are to be observed.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Battery
a)
(2) Battery release button
(3) Worklight button
(4) Battery charge indicator
(5) Stroke rate preselection thumbwheel
(6) Temperature monitoring/overload protection indic-
ator
(7) On/off switch
(8) Pendulum action adjusting lever
(9) Base plate
(10) Guide roller
(11) Saw blade receptacle
(12) Guide for parallel guide
a)
(13) Saw blade
(14) Worklight
(15) Hood for dust extraction
(16) Extraction outlet
(17) Glide shoe
(18) Anti-splinter guard
(19) Handle (insulated gripping surface)
(20) SDS lever for saw blade release
(21) Safety guard
a)
(22) Extraction hose
(23) Base plate screw
(24) Hex key
(25) Scale for mitre/bevel angles
(26) Locking screw for parallel guide
(27) Parallel guide with circle cutter
1 609 92A 74K | (28.01.2022)
(28) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless jigsaw
Article number
Rated voltage
No-load stroke rate n₀
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
during operation
storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery
GBA 10,8V 2.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
Inserting the Battery
a)
Push the charged battery into the battery holder until it
clicks into place.
a)
a)
GST 12 V-LI
3 601 EA1 0..
V=
A)
−1
min
1500–2800
mm
mm
mm
mm
°
kg
°C
°C
–20 to +50
C)
and during
GBA 12V...
Bosch Power Tools
12
18
70
3
3
45
B)
1.7–1.9
0 to +35
GAL 12...
GAX 18...
Advertisement
