78 | DX-D 40C, DX-D 40G | Getting started
Step 5: execute the exposure
Press the exposure button to execute the exposure.
At the NX workstation:
• The image is acquired from the DR detector and displayed in the
• If collimation is applied, the image is automatically cropped at the
0290B EN 20190401 1627
Make sure the generator is ready for exposure before you
press the exposure button.
WARNING:
The radiation indicator on the control console lights up
during exposure release.
WARNING:
Do not select another thumbnail until the preview image is
visible in the active thumbnail.
thumbnail.
collimation borders.