Light Sensitivity Test - PROJECT E BEAUTY LumaGlow User Manual

Recommended Before Use
In order to determine if you have a Light Sensitivity Issue please follow
the instructions below. It is recommended that you test a small, less
sensitive area of skin (i.e., like your forearm).
1.
Press the "Start/Stop" button to turn on the device and then press the
"Timer" button to set 3-minute duration of treatment.
2. Place the device on an area of the forearm. Leave in contact with
your skin for a 3-minute treatment cycle.
3. Repeat by doing another 3-minute treatment on the same area of
your arm.
4.
Wait 24 hours. You should NOT experience any adverse reaction
during the next 24 hours.
A bad reaction to light occurs if you have pain or discomfort in the
treatment areas or any skin redness for more than two hours. It can be
due to medication, supplements, or a possible skin issue.
Eye Safety
Position the goggles over your eyes
1.
2. Tie the elastic band so that the goggles t comfortably.
It is NOT recommended to shine the light source directly into eyes or
3.
the eyes of others.
Be sure you never look directly into the LEDs.
8

Light Sensitivity Test

WARNING