Maintenance; Speci Cations - PROJECT E BEAUTY LumaGlow User Manual

9
In any operating mode, press the "Start/Stop"
button, it will beep three times consecutively and
then turn o .
Do not use any detergent or liquid to clean the surface of product.
Clean the device surface with a soft dry cloth after each use.
Immediately dry the surface any time it comes into contact with
moisture, chemicals, or water.
Always keep the device clean and sterilized.
Store the device in a clean and dry place.
Red Light Photon Wavelength
Maximum Power
Power Density (Red)
Battery
.....................................................................................................
Input Voltage
...................................................................................................
Treatment Area
Use of the Device

Maintenance

Speci cations

......................................................................................................
.....................................................................
............................................................................................
........................................................... 630 nm ±5%
1.5W
80mW/cm ±10%
3.7V, 1050mAh
DC 5V, 1A
30cm ±5%
11