Teagle Tomahawk 7100 Instruction Book page 29

TOMAHAWK FAULT FINDING CHART – PART 3
Symptom
Oil leaking from
between slices of the
valve.
Fault
Internal pressure in valve.
Clamping bolts loose.
Separation of slices in valve block as a
result of reverse oil flow (only when
connected to a double acting spool
valve).
Interface seals damaged by either of the
above.
Check return line hose connected and that return
line flow is not restricted by damaged fittings or
the tractor spool valve.
Check bolts through valve tightened to correct
torque specified in the maintenance section.
Fit return pipe to free flow return on tractor, or fit
check valve on outlet port to prevent
reverse flow.
Replace damaged seals.
26
Possible Solutions