ION Total PA Spartan User Manual page 4

Speaker Stand Installation
1. Fully extend the speaker stand tripod legs on a flat, stable
surface. Look in the box contents under the foam sheet for the
rubber feet and speaker stand mounting knob.
2. Raise the mounting pole up to the appropriate height needed
and tighten the side adjustment knob.
3. Insert the pin into the bottom pin-hole so the mounting pole
stays at your set height.
TM
4. On Total PA
clockwise so the screw is not blocking the opening.
5. Line up the Total PA
stand pole and place on the pole.
6. Tighten the mounting knob clockwise on Total PA
3
4
Spartan, adjust the bottom knob counter-
TM
Spartan mounting hole with the speaker
4
1
2
TM
Spartan.
5/6