Operation - ION Magnet Rocker User Manual

Operation

Bluetooth Connecting with Magnet Rocker
Connecting to one speaker:
1. Power on the speaker by holding down the Power button for 2 seconds. Magnet Rocker
automatically enter Bluetooth pairing mode.
2. Navigate to your device's Bluetooth setup screen, find Magnet Rocker, and connect.
When connected, the Bluetooth LED will be lit solid blue. If voice prompts are enabled,
you will hear "Bluetooth Connected".
Tip: We recommend renaming each speaker in your device's Bluetooth settings so that
you can distinguish between the two.
3. Press play on your device's music player. Press the + and – buttons to adjust volume.
Press and hold the + or – buttons to navigate Bluetooth tracks.
4. To disconnect, press and hold the + and – buttons simultaneously. The LED will go from
solid to flashing blue and then off. If voice prompts are enabled, you will hear "Bluetooth
Disconnected".
TM
Stereo-Link : pairing two Magnet Rocker
1. Power on both Magnet Rocker
2. Connect to one Magnet Rocker
speaker.
3. Be sure to disconnect any Bluetooth devices from the secondary speaker before attempting
to connect to the primary speaker.
4. Press and hold the + and - buttons on the secondary speaker to link to the primary speaker.
The Bluetooth LED will flash blue and then change to solid green to indicate that a
connection has been established. If voice prompts are enabled, you will hear "Stereo-Link
Mode". These two speakers will now automatically link the next time both are powered on
and in range of one another.
5. If you are having trouble linking, disconnect all Bluetooth devices first, and then connect
after the speakers have been linked.
Tip: Magnet Rocker
The closer the speakers are, the faster they will sync.
6. To break the link between two speakers, press and hold the + and – buttons once to
disconnect the Bluetooth device, and then again to de-link the speakers.
Note: Powering off the primary speaker while in Stereo-Link
secondary speaker.
4
TM
speakers.
TM
speaker using the steps above. This will be the "primary"
TM
speakers should be within 16' (5 m) of each other to properly sync.
TM
TM
speakers:
TM
mode will also power off the
TM
will