Table of Contents
Advertisement
Wireless Travel Router WNTR2001
Power Connection Options
Depending on the cable that you received with your product, you might need a plug converter
to connect the wireless access point to the power adapter. If it is needed, the plug converter
is included in the box.
Figure 2. Plug converter
You can power on your wireless access point using either of these methods:
•
Method 1: Connect the wireless access point to an electrical outlet with the included
power adapter.
Figure 3. Power adapter
•
Method 2: Connect the wireless access point to a USB port on a nearby computer or
device with the USB power cable:
Figure 4. USB power cable
Make sure that the device where you connect the USB power cable is powered on. Some
USB ports on consumer electronic devices cannot provide the power that the wireless
access point requires. In such cases, the power LED turns solid red and the wireless
access point may reset itself or turn itself off. If this happens, try connecting the USB
cable to a different device, or use the wireless access point power adapter instead.
Chapter 1. Getting Started
| 5
Advertisement
Table of Contents
