Installation And Maintenance - LG ARUN040GSS0 Manual

MULTI V S
Outdoor Unit
2. Installation Guide at the seaside

2.2 Installation and maintenance

• Install the product where it will avoid salt water splash and beach sand as much as possible.
– Install the machine in the direction the wind blows away from the building.
– If you inevitably have to install the machine on by the shore, install a fence to block the wind to avoid direct
contact from sea wind.
– Be careful of the installation direction.
(The level of corrosion differs when the unit is parallel or vertical to the coast line.)
• Try to install the unit so that the particles from the sea side attached on the exterior panel can be sufficiently
cleaned by the rain.
• Because the water collected within the floor of the outdoor unit significantly accelerates the corrosion process,
make sure to install the unit so that water is well drained considering the inclination etc.
• For the outdoor unit installed on the sea shore, periodically wash the unit with clean water to remove any salt
attached on the unit.
• Install the unit where it is well drained. Especially, secure good drainage at the floor part.
• Always repair dents caused from installation, maintenance etc.
• Periodically check the condition of the machine (Set water resistance treatment or replace parts, if necessary.)
• When you are not running the machine for a long period of time, such as during the off season, put a cover on
the outdoor unit.
• Sufficiently maintain the machine well.
Also, when install the machine in a special environment, you need to take separate consideration sufficiently.
Special Guide
35