Related Manuals for Bell and Howell BH35
Summary of Contents for Bell and Howell BH35
- Page 2 3.5mm cable from devices. your device to the Aux-In input at the back of the BH35. Press the MODE button to switch to Auxiliary mode. While connected via Auxiliary, Connecting BH35 via Bluetooth the only controls that will function on the speaker Once powered on, the speaker will automatically is the PLAY button and volume control.
- Page 3 Press and hold the MINUS button to decrease phone/tablet, the music will pause and you will the volume. Press and hold the PLUS button to hear “Calling” from the BH35 speaker. To increase the volume. answer a call, simply press the PLAY button.
-
Page 4: Specifications
Charging Voltage: 5V internal battery is fully charged. Speaker: 45mm 4Ω 5W x 2 Frequency: 20Hz-20KHz NOTE: The BH35 can only be charged with 5V Distortion: ≤0.1% adapters/USB ports. Quick charging devices Effective Distance: 10M over 5V may cause damage. - Page 5 Elite Brands Inc., 40 Wall Street, 61st Floor New York, NY 10005 · Tel: 1-800-441-1100 www.elitebrands.com Distributed under license of BHH LLC by ELITE BRANDS INC ©2021 www.bellhowellcameras.com word mark and logos are registered trademarks owned by the Bluetooth SIG, and any use of such marks by Elite Brands Inc. is under license.