Page 2
3 seconds until you hear an audible tone. A blue LED will flash every second Bluetooth settings and enable Bluetooth. Next, enter the Bluetooth device list and select BH30. to indicate that it is powered on and searching for a Bluetooth source to pair with After selected, wait a few seconds for the pairing to complete.
FM Radio mode, press and hold the UP or phone/tablet, the music will pause and the ringer DOWN buttons to cycle through available FM will ring through the BH30 speaker. To answer stations. Tap the UP and DOWN buttons to a call, simply press the handsfree button.
Page 4
USB and MicroSD Distortion: ≤0.5% ports. Effective Distance: 10M Waterproof Grade: IPX4 Factory Reset If you are experiencing connectivity issues, you may need to perform a hard reset on your BH30. To do so, press the PLAY/PAUSE/HANDSFREE...