Sony SLV-D100 Operating Instructions Manual page 36

Playback options
Play frame by frame
Play at various speeds
(Shuttle play)
To resume normal playback
Press H PLAY.
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to "0:00:00." To search for the counter 0:00:00 point
automatically, see "To search for the counter 0:00:00 point" on page 82.
To display the counter on the TV screen, press DISPLAY.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– The picture shakes during pause.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
• The counter resets to "0:00:00" whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• When 10 hours have passed, the counter in the display window returns to "0:00:00" and the
count starts over again.
• The sound is muted during playback at various speeds.
• The picture may show noise when playing at high speed in reverse.
• While playing a tape, you can display the "SETUP MENU" but the remote commander's
function switches to DVD automatically. Press O RETURN repeatedly to exit the menu.
• When playback does not start even if you insert a tape with its safety tab removed, set "Auto
Play" to "On" in the "VIDEO FUNCTION SETUP" menu (page 84).
• Stop disc playback while playing back a video.
36
Playing a tape
Operation
During pause, press C SKIP.
During playback, press .or > SHUTTLE. You can
change the playback speed as follows.
– 7 y – 5 y – 3 y STILL y SLOW y PLAY
y 2 y 3 y 5 y 7