Pioneer AVIC-Z1000DAB Operation Manual page 26

TIP
When entering the coordinates in UTM format, touch
3
Enter the longitude value and touch [GO!].
The searched location appears on the map screen.
4
Touch [Select as Destination].
TIP
You can change the display format of the latitude and longitude to any of the following formats:
decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
NOTE
When a value is already entered in the text field, delete the value first.
Searching for a location by scrolling the map
Specifying a location after scrolling the map enables you to set the position as a
destination or waypoint.
1
Touch .
2
Touch and drag the screen to scroll the map.
3
Touch the location that you want to select as your destination.
The cursor appears.
4
Touch [Select as Destination].
Searching for the place for camping
(This function may not be able to be available on some models.)
You can search for the destination or waypoint that a camper van is available for by the
area or name.
1
Touch .
2
Touch .
3
Touch [Camping].
4
Touch [Around Here] and then select the area in which the place should be
searched for.
• [Around Here]:
Searches around the current position. Or, around the last known position if the
current position is not available. The results will be listed in order of the distance
from that position.
• [Along Route]:
Searches along the current route, and not around a point already set. This is useful
, then [UTM Coordinates].
- 26 -