Sony HDC-F950 Operation Manual page 119

PAINT menu items
Page Setting item
SW STATUS FLARE
GAMMA
BLK GAM
KNEE
WHT CLIP
DETAIL
LVL DEP
SKIN DTL
MATRIX
VIDEO LEVEL WHITE R,G,B
BLACK R,G,B,M
FLARE R,G,B
GAMMA R,G,B,M
V MOD R,G,B,M
FLARE
V MOD
TEST
GAMMA LEVEL
COARSE
TABLE
GAMMA
TEST
BLK GAMMA RGB LEVEL
RGB RANGE
Y LEVEL
Y RANGE
TEST
a) STANDARD
1: INITIAL GAIN 3.5 (equivalent to ENG camcorder)
2: INITIAL GAIN 4.0 Low ( equivalent to EFP camera)
3: INITIAL GAIN 4.0 High (equivalent to EFP camera)
Allowable settings Description
ON, OFF Turns flare correction on or off.
ON, OFF Turns gamma correction on or off.
ON, OFF Turns black gamma correction on or off.
ON, OFF Turns knee correction on or off.
ON, OFF Turns white clipping on or off.
ON, OFF Turns the detail signal on or off.
ON, OFF Turns the level depend function of the detail signal on or off.
ON, OFF Turns the skin detail on or off.
ON, OFF Turns linear matrix correction on or off.
–99 to 0 to 99 Adjusts the white level of R, G, and B.
–99 to 0 to 99 Adjusts the R, G, B, and master black level.
–99 to 0 to 99 Adjusts the R, G, and B flare level.
–99 to 0 to 99 Adjusts the R, G, B, and master gamma correction curve.
–99 to 0 to 99 Adjusts the R, G, B, and master V modulation shading.
ON, OFF Turns the flare correction circuit on or off.
ON, OFF Turns the V modualtion shading on or off.
1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
–99 to 0 to 99 Sets the R, G, B, and master gamma correction curve.
0.35 to 0.90 Sets the master gamma correction curve step by step (in 0.05
steps).
STANDARD Selects the gamma table.
a)
1, 2, 3, 4, 5, 6
USER 1, 2, 3, 4, 5
ON, OFF Turns the gamma correction function on or off.
1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
–99 to 0 to 99 Adjusts the R, G, B, and master black gamma.
1, 2, 3, 4 Sets the upper limit of the video level which the RGB black
gamma affects.
ON, OFF Turns the RGB black gamma correction function on or off.
–99 to 0 to 99 Adjusts the Y black gamma to adjust the contrast without
changing the chroma phase of the dark part.
1, 2, 3, 4 Sets the upper limit of the video level which the Y black
gamma affects.
ON, OFF Turns the Y black gamma correction function on or off.
1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
4: INITIAL GAIN 4.0 (equivalent to SMPTE-240M)
5: INITIAL GAIN 4.5 (equivalent to ITU-709)
6: INITIAL GAIN 5.0
Chapter 4 Adjustments and Settings for Recording
4-25(E)