Sony SLV-D930 GI Operating Instructions Manual page 106

DVD Troubleshooting
Symptom
There is no picture/picture noise
appears.
Even though you set the aspect ratio
in "TV Type" of the "SCREEN
SETUP" menu the picture does not
fill the screen.
There is no picture from your VCR
connected to the LINE IN jacks.
There is no sound.
Sound is noisy.
The sound volume is low.
106
Troubleshooting
Remedy
• Re-connect the connecting cord securely.
• The connecting cords are damaged.
• Check the connection to your TV (page 11) and switch
the input selector on your TV so that the signal from the
player appears on the TV screen.
• The disc is dirty or flawed.
• If the picture output from your player goes through your
VCR to get to your TV or if you are connected to a
combination TV/VIDEO player, the copy-protection
signal applied to some DVD programmes could affect
picture quality. If you still experience problems even
when you connect your player directly to your TV, please
try connecting your player to your TV's S-VIDEO input
(page 54).
• The aspect ratio of the disc is fixed on your DVD.
• The DVD player must be in standby mode to view
pictures from your VCR.
• Re-connect the connecting cord securely.
• The connecting cord is damaged.
• The player is connected to the wrong input jack on the
amplifier (receiver) (page 52).
• The amplifier (receiver) input is not correctly set.
• The player is in pause mode or in Slow-motion Play
mode.
• The player is in fast forward or fast reverse mode.
• If the audio signal does not come through the DIGITAL
AUDIO OUT (OPTICAL or COAXIAL) jack, check the
audio settings (page 55).
• When playing a CD with DTS sound tracks, noise will
come from the OUT AUDIO L/R jacks (page 30) or
DIGITAL OUT (OPTICAL or COAXIAL) jack.
• The sound volume is low on some DVDs. The sound
volume may improve if you set "Audio DRC" to "Wide
Range" (page 57).