Sony SLV-D910N/R Operating Instructions Manual page 56

4
ENTER
5
SET UP
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Dolby Digital
• MPEG
Selects the type of MPEG audio signal.
The default setting is indicated in bold print.
PCM
MPEG
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off
On
56
Audio Setup
Press B/b to select an item.
Press SET UP to exit the menu.
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
lacking a built-in MPEG decoder. If you play MPEG audio sound
tracks, the player outputs stereo signals via the DIGITAL AUDIO
OUT (OPTICAL or COAXIAL) jack.
Select this when the player is connected to an audio component
with a built-in MPEG decoder.
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
Select this when the player is connected to an audio component
with a built-in DTS decoder.