Table of Contents
Advertisement
Symptom
The title of the MP3 audio album or
track is not correctly displayed.
The disc does not start playing from
the beginning.
The player starts playing the disc
automatically.
Playback stops automatically.
You cannot perform some functions
such as stop, search, slow-motion
play, repeat play, shuffle play, or
programme play.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed or turned off.
The angles cannot be changed.
The player does not operate properly. • When static electricity, etc., causes the player to operate
VCR Troubleshooting
Symptom
The playback picture does not appear
on the TV screen.
Remedy
• The player can only display numbers and alphabet. Other
characters are displayed as asterisks.
• Programme play, shuffle play, or repeat play, has been
selected (pages 71, 73, 74).
• Resume play has taken effect (page 34).
• The disc features an auto playback function.
• While playing discs with an auto pause signal, the player
stops playback at the auto pause signal.
• Depending on the disc, you may not be able to do some
operations. See the operating manual that comes with the
disc.
• Try using the DVD's menu instead of the direct selection
button on the remote (page 66).
• Multilingual tracks are not recorded on the DVD being
played.
• The DVD prohibits the changing of the language for the
sound track.
• Try using the DVD's menu instead of the direct selection
button on the remote (page 66).
• Multilingual subtitles are not recorded on the DVD being
played.
• The DVD prohibits the changing of the subtitles.
• Try using the DVD's menu instead of the direct selection
button on the remote (page 66).
• Multi-angles are not recorded on the DVD being played.
• The DVD prohibits changing of the angles.
abnormally, unplug the player.
Remedy
• Make sure the TV is set to the channel for the VCR. If
you are using a monitor, set it to video input.
• If the VCR is connected to the TV with the Scart cable,
make sure the VCR indicator is lit in the display window.
Use the TV/VIDEO button on the remote commander to
light up the VCR indicator.
continued
107
Troubleshooting
Advertisement
Table of Contents
