Table of Contents
Advertisement
B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
.
B-2
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-VCR
B-1
R
AUDIO
L
VIDEO
to LINE OUT L/R (AUDIO)
l: Signal flow
[Speakers]
Rear (L)
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "Audio Setup" (page 56). If your AV amplifier (receiver) has an
MPEG audio decoder function, set "MPEG" to "MPEG" (page 56). Otherwise, no sound or a
loud noise will come from the speakers.
54
A/V Receiver hookup
Stereo audio cord
(red)
(supplied)
(white)
(white)
to audio input
AV amplifier (receiver) having a
decoder
Subwoofer
Coaxial digital cord
(not supplied)
and
or
(red)
to coaxial or optical
digital input
and
B-1
B-2
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
Front (L)
Center
Front (R)
Advertisement
Table of Contents
