Easyfone Prime-A6 Quick Start Manual page 29

make the menu interface easier.
3. Start-UP wizard- You can re-run the boot wizard to
quickly set the language/date/time.
4. Wallpaper- You can select the wallpaper from the system
default wallpapers or memory card.
5. Idle display- You can select the standby interface to
display the content. Display the time/date/SIM card
information, display only the time/date, display only the
SIM card information or don't display the time/date/SIM
card information.
6. Brightness- You can adjust the screen display brightness.
The system defaults to level 3. When your phone is low
battery which may reduce the screen brightness to
extend use time.
7. LCD backlight- You can set the backlight time as 5
seconds to 30 seconds. When there is no operation on
the phone, the screen will go out automatically. If you
want the screen to be always on, please select "Always
on" and press "OK" to save.
8. Keypad backlight time- You can set the keypad backlight
time.
Call settings
1. Call divert
a) Call forwarding unconditional- Activate it to divert all
calls into voice mail or the preset phone number. Press
"Check status" to check the status of this service.
b) Call forwarding on busy- When activate this function, if
your phone is in conversation, all coming calls will be
diverted to voice mail or the preset phone number.
c) Call forwarding on no reply- When activate this
function, if your phone is no answer, all coming calls
will be diverted to voice mail or the preset phone
29