Sony D350P Operating Instructions Manual page 70

To set the "Progressive" setting
If your TV accepts progressive (480p) format signals, you will enjoy accurate color
reproduction and high quality image.
1 Follow step 1 and 2 on page 67, then press V/v to
select "Progressive."
2 Press B/b to select "On," then press ENTER.
3
Follow the instructions appearing on the screen.
1
Ensure your TV is (480p) Progressive Scan
capable.
2
Connect with Component Video Output jacks
(red/green/blue connections).
See "Use this hookup if your TV has component
video input jacks" on page 64.
3
Press B/b to select [OK] to test your video
signal.
4
If video signal appears OK, video connection is
complete. Press ENTER.
The PROGRESSIVE indicator on the unit lights up
in orange.
If picture is distorted, press O RETURN.
Check the connection (page 64).
5
Press SET UP to exit the menu.
SCREEN SETUP
TV Type
[ 4:3 Letter Box
Black Level [ Off ]
Progressive [ Off ]
V v B b
RETURN SET UP
SCREEN SETUP
TV Type 4:3 Letter Box
[
Black Level [ Off ]
Progressive [ On ]
V v B b
ENTER RETURN SET UP
SCREEN SETUP
Progressive Scan Output
1) Ensure your TV is (480P) Progressive
Scan capable.
2) Connect with Component Video Output
jacks. (red/green/blue connections)
3) Select [OK] to test your video signal.
4) If video signal appears OK,
video connection is complete.
OK CANCEL
B b
ENTER RETURN SET UP
SCREEN SETUP
TEST SCREEN
SCREEN SETUP
If picture is OK, press [ENTER] key
If picture is distorted, press [RETURN] key.
To Deactivate
Press [PAUSE] on the unit for 5 seconds.
ENTER RETURN
SCREEN SETUP
TV Type 4:3 Letter Box
[
Black Level Off
[ ]
Progressive On
[ ]
V v B b RETURN SET UP
continued
Screen Setup
]
]
]
69