Sony D350P Operating Instructions Manual page 63

B Use this hookup if your A/V receiver has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not able to enjoy the surround sound effects of
this player. You must make connections using
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
1
to LINE OUT L/R (AUDIO)
l: Signal flow
[Speakers]
Rear (L)
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "AUDIO SETUP" menu (page 65). Otherwise, no sound or a loud
noise will come from the speakers.
62
A/V Receiver hookup
DVD-VCR
Stereo audio
(red)
cord (not
supplied)
(white)
(white)
to audio input
AV amplifier (receiver) having
a decoder
Subwoofer
B-1
Coaxial digital
cord (not supplied)
and or
(red)
and .
B-2
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Optical digital cord (not
supplied)
Remove jack cap
before connecting
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
Center