Step 2: Connecting The Video Cords - Sony DVP-NS64P Operating Instructions Manual

Step 2: Connecting the Video Cords

Connect this player to your TV monitor, projector, or audio component such as an AV amplifier
(receiver) using a video cord. Select one of the patterns A or B, according to the input jack on
your TV monitor, projector, or audio component.
In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor,
you must use pattern B.
A
TV, projector or
audio component
Component video
cord (not supplied)
l : Signal flow
Video input jack
A
You will enjoy standard quality images.
Component video input jacks
B
(Y, P , P )
B R
You will enjoy accurate color reproduction
and high quality images.
If your TV accepts progressive 480p format
signals, use this connection and set
"PROGRESSIVE (COMPONENT OUT
ONLY)" in "SCREEN SETUP" to "ON"
(page 53) to output progressive signals.
When connecting to a wide screen TV
Depending on the disc, the image may not fit
your TV screen. To change the aspect ratio,
see page 52.
14
(yellow)
INPUT
VIDEO
L
AUDIO
R
to LINE OUT (VIDEO)
(green)
(blue)
(red)
Audio/video
cord (supplied)
(yellow)
to COMPONENT
VIDEO OUT
Note
Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the TV
screen. If your TV has only one audio/video input
jack, connect the player to this jack.
CD/DVD player
CD/DVD player
B
COMPONENT
VIDEO IN
Y
(green)
P
B
(blue)
P
R
(red)
TV, projector or
audio component
VCR
Connect
directly
TV