IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, wARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND wITH CARE FOR THE PURPOSE FOR wHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND wILL INVALIDATE THE wARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. CONTENTS
section 2.
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.2. technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 3.
safety/operational Instructions. . . . . . . . . . . . . . . . . . .2.
section 4.
Maintenance/Examination/Inspection. . . . . . . . . . . . . .2.
section 5.
Assembly and storage. . . . . . . . . . . . . . . . . . . . . . . . . .3.
section 6.
owner's & operator's responsibilities . . . . . . . . . . . . .3.
section 7.
Declaration of conformity. . . . . . . . . . . . . separate file.
section 8.
Parts List/Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.
2. GENERAL
2.1
Identification
supplier:
sealey Power Products,
Kempson Way,
suffolk Business Park,
Bury st Edmunds,
suffolk, IP32 7Ar.
Model no:
Wf10
2.2
Technical Data
Rated Capacity
safe Working Load (sWL) 10t (tested to 50% overload).
Working Load Limit (WLL) 10t (tested to 50% overload).
Lifting cap. in Position 1: . . . . . . . . . . . . . . 1100kg
Lifting cap. in Position 2: . . . . . . . . . . . . . . 1000kg
Lifting cap. in Position 3: . . . . . . . . . . . . . . 900kg
Lifting cap. in Position 4: . . . . . . . . . . . . . . 800kg
Lifting cap. in Position 5: . . . . . . . . . . . . . . 700kg
Maximum Lift Ht. at Minimum Jib Extn: . . . 2020mm
Maximum Lift Ht. at Maximum Jib Extn: . . . 2340mm
Length of Jib Position 1: . . . . . . . . . . . . . . . 955mm
Length of Jib Position 2: . . . . . . . . . . . . . . . 1060mm
Length of Jib Position 3: . . . . . . . . . . . . . . . 1165mm
Length of Jib Position 4: . . . . . . . . . . . . . . . 1270mm
Length of Jib Position 5: . . . . . . . . . . . . . . . 1375mm
a)
Design capability: test Load 50% overload.
b)
for a description of in-service and out-of-service conditions see
section 3 safety, section 4 Maintenance and section 6.
c)
the crane is fitted with a bypass valve that will prevent the ram
from over extending.
d)
for applications see section 3 safety.
e)
for control system, see fig.1 for release valve and pump handle
assy. usage is explained in section 3.2 operation.
f)
for ground condition requirements, see section 3 safety.
g)
for information on parts and materials requiring specialised
repair techniques see section 4 Maintenance.
InstructIons for:
PROFESSIONAL FOLDING CRANE
MoDEL no:
Page No.
Max. Lift @ min. Jib extension: ......................................... 2020mm
Max. Lift @ max. Jib extension: ........................................ 2340mm
Height (max) of frame: ........................................................ 125mm
Length (max) of frame: ...................................................... 1420mm
Width (max) of frame: ........................................................ 1130mm
overall height: mm ............................................................. 1520mm
Width inside frame (max): ................................................... 970mm
Distance between rear wheel centres: ................................. 300mm
Weight:
.................................................................................. 98kg
fig.1
PuMP HAnDLE.
PAGE 1
Original Language Version
wF10.
900kg Max.
1000kg Max.
1100kg Max.
1420mm
rELEAsE VALVE
Wf10
700kg Max.
800kg Max.
Issue: 2 - 19/10/09