Sony DVP DVP-NS611HP Operating Instructions Manual page 36

SD
HD
HD
(1920×1080i)
HD
(1920×1080i)
HD
b
• "(1920×1080i) HD
are effective only when you set "HDMI
RESOLUTION" to "1920×1080i" and "TV
TYPE" to "16:9."
• If you set this setting to "PhotoTV HD,"
"(1920×1080i) HD
effect, rotation, and zoom function are not
available.
• If you want to use effect, rotation, and zoom
function; sets this setting to "SD
or "HD."
• If you set this setting to "PhotoTV HD,"
"(1920×1080i) HD
next image appears after black mute.
• HDMI signal will stop momentarily during
loading or unloading DATA disc.
• When you set to "PhotoTV HD," the player
changes video signal output from "HDMI
RESOLUTION" to "1920×1080i," "TV TYPE"
to "16:9," and "YC
"YC C " automatically even though the current
B R
settings are kept.
• Set this setting to "SD
view photo files in analog video outputs with the
HDMI connection.
◆ YC
C /RGB (HDMI)
B R
Selects the type of HDMI signal output from
HDMI OUT jack.
You cannot select this when "PhotoTV HD"
mode is activated (page 28).
YC C
B R
RGB
b
• If the playback picture becomes distorted, set this
setting to "RGB."
• If the HDMI OUT jack is connected to equipment
with a DVI jack, "RGB" signals will be
automatically output even when you select
"YC C ."
B R
US
36
Displays standard definition
picture with black frame.
Displays high definition picture
with black frame.
Displays high definition picture
without black frame.
Displays high definition picture
with black frame at 1920×1080
pixels.
Displays high definition picture
without black frame at
1920×1080 pixels.
" and "(1920×1080i) HD"
" or "(1920×1080i) HD,"
," "HD
" or "(1920×1080i) HD,"
C /RGB (HDMI)" to
B R
," when you want to
Outputs YC C signals.
B R
Outputs RGB signals.
◆ AUDIO (HDMI)
Selects the type of audio signal output from
the HDMI OUT jack.
AUTO
PCM
b
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DIGITAL/DTS signals and "AUTO"
is selected. In this case, select "PCM."
◆ CONTROL FOR HDMI
Switches the Control For HDMI setting
on or off.
ON
,"
OFF
◆ LANGUAGE FOLLOW
Switches the languages of the DVD player
to the same as the current TV OSD
language.
You cannot select this when "CONTROL
FOR HDMI" is set to "OFF."
ON
OFF
b
• Turn off any display before using this function.
• The OSD language for player keeps if the TV's
language cannot be supported.
Normally, select this. Outputs
audio signals according to the
"DIGITAL OUT" settings
(page 34).
Converts Dolby Digital, or 96
kHz/24 bit PCM signals to 48
kHz/16 bit PCM.
Allows you to use the
CONTROL FOR HDMI
features (page 12).
Switches this function off.
Switches this function on.
Switches this function off.