Hdmi Setup - Sony DVP DVP-NS611HP Operating Instructions Manual

◆ DTS
Selects the type of DTS audio signals.
OFF Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
ON
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
b
• When you play a DVD VIDEO with DTS sound
tracks, set "DTS" to "ON" in "AUDIO SETUP"
(page 35).
• If you connect the player to audio equipment
without a DTS decoder, do not set "DTS" to "ON"
in "AUDIO SETUP" (page 35). A loud noise may
come out from the speakers, affecting your ears or
causing the speakers to be damaged.
• If the HDMI OUT jack is connected to equipment
not compatible with DTS signals, the "OFF"
signals will be automatically output even when
you select "ON."
◆ 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
b
• The analog audio signals from the LINE OUT
L/R (AUDIO) jacks are not affected by this
setting and keep their original sampling frequency
level.
• If the HDMI OUT jack is connected to equipment
not compatible with 96 kHz/24 bit signals,
48 kHz/16 bit PCM will be automatically output
even when you select "96kHz/24bit."

HDMI SETUP

You can adjust items related to the HDMI
connection.
◆ HDMI RESOLUTION
Selects the type of video signals output from
the HDMI OUT jack. When you select
AUTO (1920×1080p) (default), the player
outputs video signals of the highest resolution
acceptable for your TV. If the picture is not
clear, natural or to your satisfaction, try
another option that suits the disc and your
TV/projector, etc. For details, refer also to the
instruction manual supplied with the TV/
projector, etc.
You cannot select this when "PhotoTV HD"
mode is activated (page 28).
AUTO
Normally, select this.
(1920×1080p)
1920×1080i Sends 1920×1080i video
signals.
1280×720p Sends 1280×720p video
signals.
720×480p Sends 720×480p video signals.
To reset the setting
If the picture does not appear normal or goes
blank, press [/1 to turn off the player, and
enter "369" using the number buttons on the
remote, then press [/1 to turn on the player
again.
b
In case of "AUTO (1920×1080p)," the player
automatically adjusts the video signals that are
suitable for the TV.
Other cases, the player directly send the signal even
if TV cannot accept.
◆ JPEG RESOLUTION
Selects the type of JPEG resolution so that
you can enjoy high picture quality via your
HDMI connection.
You cannot select this when "HDMI
RESOLUTION" is set to "720×480p" or "TV
TYPE" is set to "4:3 LETTER BOX" or "4:3
PAN SCAN."
PhotoTV HD Displays extra highly-detailed
picture when connecting to a
Sony's "PhotoTV HD"-
compatible device.
US
35
,continued