1.Place the floor panel where you can see all
wires.
Grab the sauna's main power cord and push the
female plug through the hole on the back side.
2. Place the back panel on the floor panel
3. Place one of the side panels on the floor panel
and close buckles.
4. Place the other side panel on the floor panel and
close the buckles.
5. Slide down the bench heater panel into the
wooden spaces on the side panels.
Connect the sauna main power plug to the
power supply.
Couple the USB audio and the controller
connectors to the power supply.
Connect the front and the floor heater plugs to
the power supply.
Connect the bench heater plug to the power
supply.
healthmatesauna.com
wiring guide