TP-Link AC1750 User Manual page 35

Wi-fi range extender

Hide thumbs Also See for AC1750:

Table of Contents

the extender?

When a device connects through the extender to your router, the MAC address of the

device shown on the router is translated to another MAC address. If your router's MAC

filter, wireless access control, or ACL is enabled, the devices connected to the extender

cannot get an IP address from the extender and cannot access the internet.

To solve this problem, please follow the steps below:

1. Log in to your router and disable the MAC filter, wireless access control or ACL.

Note: For more information about how to disable your router's MAC filter, wireless access control or ACL,

please refer to your router's user guide.

2. Power on your extender, and run the

3. Connect all of your devices to the extended network, and make sure the router's Link

LED remains lit.

4. On your router, add all the Online Devices' MAC addresses to your router's MAC filter

table.

5. Enable the router's MAC filter, wireless access control, or ACL to complete the

configuration.

Downloaded from

ManualsNet.com

search engine

Quick Setup

to configure your extender.

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the AC1750 and is the answer not in the manual?