HOMCOM 370-006 Owner's Manual page 8

Assembly Steps
5. Mirror assembly
Mirror
base
(front)
6. Seat assembly
7. Connect the power supply
Mirror
Mirror base(back)
Seat
machine
● Insert the mirror base(front) into the holes
on handle bar.
● Fit the mirror into the mirror base(front).
● Fit the mirror(back) into the mirror(front).
● Use 4*Ø3x8 screws to secure it.
● Repeat for the other side.
● Use a screwdriver to remove the M5x12
M5x12
machine screw at the rear of the seat.
● Remove the seat.
screw
● Plug the connector into the terminal on
battery as shown.
● Use a screwdriver to replace the seat.