Table of Contents
Advertisement
6.10. Removal of Analysis Block
1. Remove the lamp unit according to the section 6.9. "Removal of
Lamp Unit".
2. Remove the upper case according to the section 6.2. "Removal of
Upper Case".
3. Remove the A-P.C.Board according to the section 6.3. "Removal of
A-P.C.Board".
4. Unscrew the 2 screws and remove the intake duct (1) block (with R-
P.C.Board).
5. Unscrew the 1 screw, then remove the thermofuse cover and the
thermofuse.
Note:
- It is possible to work while wired.
22
Advertisement
Table of Contents
