Setting Name
Input
USB Audio Out
RCVUN
(USB port
equipped
models only)
High Altitude
RCVUN
Restore Menu
RCVUN
Defaults
*1 When plug-and-play is turned on, the projector will make that device the input source
automatically. For details about plug-and-play, see "USB Function Guide" on the bundled
CD-ROM.
Setting
Unit
Single
When playing back a movie file stored on a USB memory
device, you can select audio output from the projector's
built-in speaker or to the line output.
Speaker*:
Select this option to output of movie file audio from the
speaker.
Line:
Select this option to output of movie file audio from the
AV terminal.
Single
Use this sub-menu to turn the high-altitude fan speed
setting on or off in accordance with the altitude of the
area where you are using the projector.
On:
Select this setting when using the projector in a high
altitude (1,500 to 3,000 meters above sea level) area
where air is thin. This setting increases cooling efficiency.
Off*:
Select this setting at normal altitudes (up to 1,500 meters).
Important!
Do not use this projector at altitudes greater than
3,000 meters above sea level.
Single
This sub-menu returns all of the sub-menu items on the
Option Settings 2 main menu to their initial default
settings.
27
Description