Advertisement
Welding wire can cause injury; Do not press gun
trigger until instructed to do so. Do not point gun
toward any part of the body, other people, or any
metal when threading welding wire.
▪ This welding machine is only for MMA and gas-less flux-cored
welding; This machine cannot connect to a spool gun which is
recommended for other materials.
▪ Do not weld or heat Aluminium, as it requires shielding gas and
this machine is a gas-less welding machine. Likewise, do not weld
lead, zinc, cadmium, mercury, beryllium, cobalt, manganese,
copper, silver, barium, chromium, vanadium, nickel, or similar
metals without seeking professional advice and inspection of the
ventilation of the welding area. These metals produce extremely
toxic fumes which can cause discomfort, illness and death.
▪ Do not, in any manner, come into physical contact with any part
of the welding current circuit, which includes:
i. Workpiece or any conductive material in contact with it.
ii. Ground clamp.
iii. Electrode or Welding Flux-cored Wire.
iv. Any metal parts on the electrode holder or MAG Gun.
▪ All the equipment should be kept in good working condition,
inspected and, when defective, promptly repaired or withdrawn
from service.
▪ Training should be sought out in the safe use of this
equipment, the processes and the emergencies.
WARNING!
operation! Do not use a product that is only partly
assembled or assembled with damaged parts! Follow the
assembly instructions step-by-step
The product must be fully assembled before
5
IBL M200-105
Advertisement
