Automatically Adjusting The Picture; Selecting The On-Screen Display Language - Sony CPD-L133 Operating Instructions Manual

Getting Started
Automatically Adjusting the
Picture
If the picture is flickering or fuzzy, press the AUTO button.
The monitor is automatically adjusted to match the signal
from the connected computer.
Further fine adjustments may be needed with some
computers. In this case, manually adjust the monitor by
referring to "Customizing Your Monitor" on page 9.
1
Turn on the monitor.
2
Turn on the computer.
3
Press the AUTO button.
The picture is adjusted to fit the center of the screen.
AUTO
Notes
• This function is intended for use with a computer running
Windows or similar graphic user interface software that
provides a full-screen picture. It may not work properly if the
background color is dark or if the input picture does not fill the
screen to the edges (such as an MS-DOS prompt).
• The screen may go blank for a few seconds while performing the
auto-sizing function. This is not a malfunction.
If the picture is flickering or fuzzy even after you
press the AUTO button
Adjust the Pitch and Phase manually (page 11).
8
Selecting the On-Screen Display
Language
You can select the OSD language from English, French,
German, Spanish, Italian, and Japanese.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ø /‡ buttons to select LANGUAGE, and
press the MENU button.
The LANGUAGE OSD appears.
MENU
3
Press the ø /‡ buttons to select the desired language,
and press the MENU button.
The MENU OSD of the selected language appears.
MENU
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
MENU OK
MENU
EXIT
PHASE
PITCH
CENTER
ZOOM
COLOR
LANGUAGE
OPTION
LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
œ { Œ
MENU OK
MENU
EXIT
PHASE
PITCH
CENTER
ZOOM
COLOR
LANGUAGE
OPTION