Related Manuals for Anzzi ENVO WH-AZ035-M1
Summary of Contents for Anzzi ENVO WH-AZ035-M1
- Page 1 ITEM: WH-AZ035-M1 WH-AZ006-M1 ANZZI ELECTRIC INSTANT WATER HEATER INSTALL & OPERATION MANUAL V1.0 next page...
- Page 3 PRODUCT SIZE CHART TOOLS AND MATERIALS Bucket Thank you for purchasing ENVO ELECTRIC INSTANT WATER HEATER. To enjoy your hot water life at its best, please read and follow the installation and operation instructions carefully, to ensure the long life and reliable operation of this appliance.
-
Page 4: Table Of Contents
TABLE OF CONTENTS Safety Precautions ----------------------------------------------------------------------------- PG.1 Electrical Diagram ------------------------------------------------------------------------------ PG.3 Product Inner Structure ---------------------------------------------------------------------- PG.3 Product Specifications ----------------------------------------------------------------------- PG.4 Installation Guideline ------------------------------------------------------------------------- PG.4 Installation ---------------------------------------------------------------------------------------- PG.6 Operation Instructions ------------------------------------------------------------------------ PG.10 Cleaning & Maintenance --------------------------------------------------------------------- PG.10 Trouble-Shooting ------------------------------------------------------------------------------- PG.11 Packing List -------------------------------------------------------------------------------------- PG.11... -
Page 5: Safety Precautions
SAFETY PRECAUTIONS WARNING When using electrical appliances, basic Use stainless steel flexible hoses or copper ● safety precautions should always be tubes of 1/2” on the inlet and outlet. followed including the following: DO NOT USE PVC, CPVC or plastic supply line directly to the heater. - Page 6 SAFETY PRECAUTIONS ATTENTION It is extremely important to FLUSH the Increasing the water temperature setting ● ● pipes to wash away sundries and residue in may improve the cleaning performance of the pipes before connecting the water heater dishwashers. to it. The user can adjust the temperature setting ●...
-
Page 7: Electrical Diagram
ELECTRICAL DIAGRAM WH-AZ035-M1 WH-AZ006-M1 32 32 PRODUCT INNER STRUCTURE Fig 1 PG.3... -
Page 8: Product Specifications
PRODUCT SPECIFICATIONS Model WH-AZ035-M1 WH-AZ006-M1 Voltage 120V 240V Wattage 3500W 6000W Rated Current 29.5A Min. required circuit breaker Min. wire size (L,N,L1,L2,E) 10 AWG 12 AWG Max. water pressure 87 Psi (0.6 MPa) Min. water flow to activate unit 0.4 GPM (1.5 L/min) Weight 4.21 lbs Product Dimensions (D×H×W) - Page 9 INSTALLATION GUIDELINE Install the water heater in a dry, clean area, There must be sufficient clearance between ● ● as close to the target faucet as practically any object and the top, rear and sides of the possible. Avoid installing in rooms that are water heater in the event service is needed.
-
Page 10: Installation
INSTALLATION GUIDELINE ATTENTION ENVO does not cover any damage or defect caused by installation, attachment ● or use of any type of energy-saving or other unapproved devices (other than those authorized by ENVO) into, onto or in conjunction with the water heater. The use of unauthorized energy-saving devices may shorten the life of the water heater and may endanger life and property. - Page 11 INSTALLATION Step 1: 1. Mark two screw hole locations on the wall where the water heater is going to be placed. Make sure both holes are vertical and 5.75” (146mm) apart if installing the heater with the outlet and inlet pointed downward or 5.47” (139mm) if the outlet and inlet pointed upwards. 2.
- Page 12 INSTALLATION Plumbing Connections ● ATTENTION 1. It is recommended that this water heater 5. It is recommended to install a manual shut-off be installed by a licensed and qualified valve(not provided) at the inlet water connection plumber in accordance with all applicable of the water heater to allow for easy shut-off national, state, and local plumbing codes.
- Page 13 INSTALLATION 1. Open the shut-off valve to allow water to flow into the water heater. 2. Check for any leaks at plumbing connections. If there is any leaks from the nipples, hand tighten them then tighten with wrench. DO NOT over tighten. 3. Open several hot water fixtures to allow water to run through the water heater to purge air from the water lines.
-
Page 14: Operation Instructions
OPERATION INSTRUCTIONS CAUTION: Wait until water is fully flowing through the heater before turning on the breaker. 1. Allow water to flow through the water heater unit. Allow the water to flow continuously to flush out any debris as well as purge the pipes of any air. 2. -
Page 15: Trouble-Shooting
CLEANING & MANTENANCE Cleaning Steps： Step 1. Shut off power to the water heater before draining water. Step 2. Inspect the inlet and outlet water connections for any signs of damage or failure. Look for any signs of leakage, damage, or cracks in each connection. Step 3.
Need help?
Do you have a question about the ENVO WH-AZ035-M1 and is the answer not in the manual?
Questions and answers