Subscribe to Our Youtube Channel
Related Manuals for Anzzi ENVO WH-AZ011-M2
Summary of Contents for Anzzi ENVO WH-AZ011-M2
- Page 1 ITEM: WH-AZ011-M2 WH-AZ146-M2 ANZZI ELECTRIC INSTANT WATER HEATER INSTALL & OPERATION MANUAL V1.0 next page...
- Page 3 PRODUCT SIZE CHART TOOLS AND MATERIALS Bucket Thank you for purchasing ENVO ELECTRIC INSTANT WATER HEATER. To enjoy your hot water life at its best, please read and follow the installation and operation instructions carefully, to ensure the long life and reliable operation of this appliance.
-
Page 4: Table Of Contents
TABLE OF CONTENTS Safety Precautions ----------------------------------------------------------------------------- PG.1 Electrical Diagram ------------------------------------------------------------------------------ PG.3 Product Inner Structure ---------------------------------------------------------------------- PG.3 Product Specifications ----------------------------------------------------------------------- PG.4 Installation Guideline ------------------------------------------------------------------------- PG.4 Installation ---------------------------------------------------------------------------------------- PG.6 Operation Instructions ------------------------------------------------------------------------ PG.10 Cleaning & Maintenance --------------------------------------------------------------------- PG.10 Trouble-Shooting ------------------------------------------------------------------------------- PG.11 Packing List -------------------------------------------------------------------------------------- PG.11... -
Page 5: Safety Precautions
SAFETY PRECAUTIONS WARNING When using electrical appliances, basic Use stainless steel flexible hoses or copper ● safety precautions should always be tubes of 1/2” on the inlet and outlet. followed including the following: DO NOT USE PVC, CPVC or plastic supply line directly to the heater. - Page 6 SAFETY PRECAUTIONS ATTENTION It is extremely important to FLUSH the Increasing the water temperature setting ● ● pipes to wash away sundries and residue in may improve the cleaning performance of the pipes before connecting the water heater dishwashers. to it. The user can adjust the temperature setting ●...
-
Page 7: Electrical Diagram
ELECTRICAL DIAGRAM AC240V 60Hz THERMAL CUT-OUT 194°F CONTROL SYSTEM DISPLAY INLET TEMP.SENSOR SCREEN OUTLET TEMP.SENSOR FLOWMETER REMARK: R:HEATING SYSTEM T:TRIAC PRODUCT INNER STRUCTURE bottom control case board flow meter terminal heating blocks chamber temp. sensor Fig 1 PG.3... -
Page 8: Product Specifications
PRODUCT SPECIFICATIONS Model WH-AZ011-M2 WH-AZ146-M2 Voltage 240V 240V Wattage 11000W 14600W Rated Current 47.8A 60.83A Min. required circuit breaker Min. wire size (L1, L2, E) 6 AWG 4 AWG Max. water pressure 87 Psi (0.6 MPa) Min. water flow to activate unit 0.53GPM (2 L/min) Weight 9.04 lbs... - Page 9 INSTALLATION GUIDELINE Install the water heater in a dry, clean area, There must be sufficient clearance between ● ● as close to the target faucet/shower as any object and the top, rear and sides of the practically possible. Avoid installing in rooms water heater in the event service is needed.
-
Page 10: Installation
INSTALLATION GUIDELINE ATTENTION ENVO does not cover any damage or defect caused by installation, attachment ● or use of any type of energy-saving or other unapproved devices (other than those authorized by ENVO) into, onto or in conjunction with the water heater. The use of unauthorized energy-saving devices may shorten the life of the water heater and may endanger life and property. - Page 11 INSTALLATION Step 1: Step 2: 1.Locate appropriate installation position If screw locations are in wall stud, drive for the water heater. mounting screws directly into stud. If screw 2.Place template(provided) on wall and locations are not in stud. Drilling three use pencil to mark screw hole locations.
- Page 12 INSTALLATION Plumbing Connections ● ATTENTION 1. It is recommended that this water heater 5. It is recommended to install a manual shut-off be installed by a licensed and qualified valve(not provided) at the inlet water connection plumber in accordance with all applicable of the water heater to allow for easy shut-off national, state, and local plumbing codes.
- Page 13 INSTALLATION 1. Open the shut-off valve to allow water to flow into the water heater. 2. Check for any leaks at plumbing connections. If there is any leaks from the nipples, hand tighten them then tighten with wrench. DO NOT over tighten. 3. Open several hot water fixtures to allow water to run through the water heater to purge air from the water lines.
-
Page 14: Operation Instructions
OPERATION INSTRUCTIONS CAUTION: Wait until water is fully flowing through the heater before turning on the breaker. 1. Allow water to flow through the water heater unit. Allow the water to flow continuously to flush out any debris as well as purge the pipes of any air. 2. -
Page 15: Trouble-Shooting
CLEANING & MANTENANCE Cleaning Steps： Step 1. Shut off power to the water heater before draining water. Step 2. Inspect the inlet and outlet water connections for any signs of damage or failure. Look for any signs of leakage, damage, or cracks in each connection. Step 3.
Need help?
Do you have a question about the ENVO WH-AZ011-M2 and is the answer not in the manual?
Questions and answers
My water heater will not go above 113 degree why
The Anzzi ENVO WH-AZ011-M2 water heater may not go above 113°F because it comes with a factory temperature setting of 120°F (49°C) due to safety regulations. If the water flow is too high or the inlet strainer, faucet, or shower head is clogged, it can also cause lower water temperatures. Reducing the water flow and cleaning any clogged parts may help increase the temperature. The unit allows temperature adjustment, so increasing the setting within the safety limits may raise the output temperature.
This answer is automatically generated