Table of Contents
Advertisement
If the vehicle only has a
cigarette lighter, use the
cigarette lighter.
Do not pinch the power
plug cord in the door or
window.
7. Start the vehicle. The
vehicle must be running
while using the air
compressor.
8. Press the on/off button (5)
to turn the tire sealant and
compressor kit on.
The compressor will inflate
the tire with air only.
9. Inflate the tire to the
recommended inflation
pressure using the
pressure gauge (8). The
recommended inflation
pressure can be found on
the Tire and Loading
Information label. See Tire
Pressure 0 372.
The pressure gauge (8)
may read higher than the
actual tire pressure while
the compressor is on. Turn
the compressor off to get
an accurate pressure
reading. The compressor
may be turned on/off until
the correct pressure is
reached.
Caution
If the recommended
pressure cannot be reached
after approximately
25 minutes, the vehicle
should not be driven farther.
The tire is too severely
damaged and the tire
sealant and compressor kit
cannot inflate the tire.
Remove the power plug
from the accessory power
outlet and unscrew the
inflating hose from the tire
valve. See Roadside
Assistance Program 0 439.
10. Press the on/off button (5)
to turn the tire sealant and
compressor kit off.
Be careful while handling
the compressor as it could
be warm after usage.
Vehicle Care
11. Unplug the power plug (9)
from the accessory power
outlet in the vehicle.
12. Turn the air only hose (10)
counterclockwise to
remove it from the tire
valve stem.
13. Replace the tire valve
stem cap.
14. Return the air only hose
(10) and power plug (9)
back to their original
storage location.
15. Return the equipment to
its original storage location
in the vehicle.
The tire sealant and
compressor kit has accessory
adapters located in a
compartment on the bottom
of its housing that can be used
to inflate air mattresses,
balls, etc.
397
Advertisement
Chapters
Table of Contents
