Storing The Station Names; Station Memo - Sony CDX-4480ESP Operating Instructions Manual

If you cannot tune in a preset
station
Push the SEEK/AMS control up or down
momentarily to search for the station
(Automatic Tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT), then press (3) (PLAY MODE) repeatedly
until "LOCAL" (local seek mode) is displayed. Then
press (4) (n) to select "ON."
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, push the SEEK/AMS control up or down
and hold until the desired frequency appears
(manual tuning).
If FM stereo reception is poor
EN
— Monaural Mode
1
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until "MONO"
appears.
2
Press (4) (n) repeatedly until
"MONO-ON" appears.
The sound improves, but becomes
monaural ("ST" disappears).
3
Press (SHIFT).
To go back to the normal mode, select
"MONO-OFF" in step 2 above.
Changing the displayed items
Each time you press (DSPL), the item changes
as follows:
z Frequency
MOTION DISPLAY* Z
* All the items above are scrolled in the display one
by one in order.
10

Storing the station names

— Station Memo

You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can store up to eight characters
for a station.
Storing the station names
1
2
3
z Clock
4
Tip
To erase/correct a name, enter "_" (under-bar) for
each character.
Tune in a station whose name you want
to store.
Press (LIST) for two seconds.
FM1
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
FM1
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
FM1
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
To return to the normal radio reception,
press (LIST) for two seconds.