Mechanical Specifications; Specifications; Mechanical Dimensions; Mini Pci Express Interface - Samsung GT-Y3400 Installation Manual And User's Manual

Table of Contents

GT-Y3400 Installation Guide and User Manual

2. Mechanical specifications

Mechanical drawings of the GT-Y3400 module following one.

Figure 3.Mechanical dimensions of the GT-Y3400 module

The card edge connector of the GT-Y3400 module complies with the PCI Express Mini Card

specification and mates with a 52 pin Mini PCI Express connector.

This specification defines an implementation for small form factor PCI Express cards. The

specification uses a qualified sub-set of the same signal protocol, electrical definitions, and

configuration definitions as the PCI Express Base Specification, Revision 1.1. Where this

specification does not explicitly define PCI Express characteristics, the PCI Express Base

Specification governs.

The primary differences between a PCI Express add-in card (as defined by the PCI Express

Card Electromechanical Specification) and a PCI Express Mini Card add-in card is a unique

card form factor optimized for mobile computing platforms and a card-system interconnection

optimized for communication applications. Specifically, PCI Express Mini Card add-in cards are

smaller and have smaller connectors than standard PCI Express add-in cards.

Figure 4 shows a 52 pin PCI Express Mini Card connector.

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization

| Samsung Electronics

Table of Contents