Operation - PowerTec AF4001 Owner's Manual

Refer to Figure 7 to 8
This air filtration system can be controlled using the
remote control (Figure 7) or the control panel (Figure 8)
located at the rear of the unit.
NOTE: The filtration timing can ONLY be controlled with
the remote.
ON/SPEED CONTROL
Press the ON/SPEED button on the remote control or the
control panel. When turned on the air filtration system
will be in the LOW speed. The LOW LED light on the
control panel will illuminate. Press the ON/SPEED button
to change speeds. The LOW, MID or HI LED light will
illuminate to indicate the selected speed.
FILTRATION TIMING
NOTE: The filtration timing can ONLY be controlled with
the remote.
The TIME button controls the timer setting. The 1 HR,
2 HR and 4HR LED lights on the control panel (Figure 8)
will illuminate to show the filtration timing length.
• Press the TIME button once and the 1HR LED light will
illuminate. The machine will operate for 1 hour then turn
off.
• Press the TIME button twice and the 2HR LED light will
illuminate. The machine will operate for 2 hours then
turn off.
• Press the TIME button three times and the 4HR LED
light will illuminate. The machine will operate for 4 hours
then turn off.

OPERATION

NOTE: If no filtration timing LED light is illuminated the air
filtration system will operate until the unit is turned off.
TO TURN THE UNIT OFF
Press the OFF button on the remote control or the control
panel to turn the unit off.
Figure 7
Figure 8
5
5