Sony Handycam DCR-HC20 Operation Manual page 46

FLASH LVL
AUTO SHTR
46
Customizing Your Camcorder
Note that these settings will not function with external flashes that do not support
the following settings.
HIGH To make the flash (optional) level higher than normal.
GNORMAL
To use the normal setting.
LOW To make the flash (optional) level lower than normal.
Note
b
• The setting returns to [NORMAL] when you disconnect the power source from your
camcorder for more than 5 minutes.
GON
Select to automatically activate the electronic shutter to adjust the
shutter speed when recording in bright conditions.
OFF Select when recording without using the electronic shutter.