LG LDFN343 Series Owner's Manual page 26

us_main.book.book Page 26 Monday, April 25, 2022 7:45 AM
26 OPERATION
Mode Description
Various conditions
• Place heavily soiled dishes like
plates and bowls in the lower rack
and lightly soiled dishes like cups
and small plates in the upper rack to
get the best results.
High Temp.
Raises the main wash temperature to improve
cleaning.
If the High Temp. option is added to a cycle, the
indicator stays lit at the end of the cycle if the
a
dishes were properly sanitized. If the dishwasher
could not properly sanitize the dishes because the
High Temp. option was not selected, the cycle was
interrupted or the water could not be heated to
the required temperature, the indicator will not
light up at the end of the cycle. Open and close the
door or press POWER to turn the indicator off.
NOTE
• This high temperature rinse sanitizes dishes and
glassware in accordance with the NSF/ANSI
Standard 184 for residential dishwashers.
Certified residential dishwashers are not
intended for use in licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements for soil
removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all
Cycle/Option Guide
The cycle guide below shows the available options for each cycle.
Cycle
Soil Level
(L)
Water Usage
(gal)
Wash Time with Options
(Mins.)
cycles on a certified machine have passed the
sanitization performance test.
Extra Dry
Select the Extra Dry option for better drying
performance. This option adds extra drying time to
the cycle and raises the heated rinse temperature.
• When the rinse aid is empty, the Extra Dry
option is selected automatically.
Night Dry
Dishes are often left in the dishwasher overnight
after the cycle ends. This can result in the steam
inside the tub condensing on dishes, leaving them
wet. This option runs the ventilation fan
periodically to help vent the steam from the tub.
• Press and hold Extra Dry for three seconds to
activate.
• The Night Dry option is selected by default for
all cycles for which it is available, except the
Normal cycle.
• To add the Night Dry option to the Normal
cycle, press and hold Extra Dry for 3 seconds.
Delay Start
This feature delays the start of a selected cycle.
Each time the Delay Start button is pressed, the
delay time increases by an hour. The delay time
can be set from 1 to 12 hours, in one-hour
increments.
Auto Normal
All levels All levels
13.8 - 18.1 9.2 - 19.5
3.6 - 4.8 2.4 - 5.2
90 - 203 99 - 191
Heavy Turbo
Heavy Heavy
26.9 27.5
7.1 7.3
141 - 216 60 - 121
Machine
Clean
12.3
3.2
82