Long Term Storage - Tarmo 311311 Instruction Manual

LONG-TERM STORAGE
Devices and accessories that are not completely drained can be destroyed by
frost. Completely drain the device and accessories and protect them against
frost. Do not store the high-pressure washer outdoors. After using the device,
make sure there is no water in the pump and the hose. Before you store it,
the device should be cleaned and it should be dry.
After long-term storage without operating the device, it is possible that dirt
or dust could form inside the device, making it hard to start again. In such
conditions, it is recommended to disconnect the power supply and rotate the
motor by hand several times so as to avoid excessive current draw on the
motor and the power supply.
Warranty
Tarmo high-pressure washers are carefully manufactured and undergo qual-
ity testing before leaving the factory. If, however, you find a material, instal-
lation or manufacturing fault in your product, it will be dealt with under our
warranty either by repairing the product free of charge or by replacing the
defective device with a new one.
Tarmo high-pressure washers come with a 24-month warranty valid from
the date of purchase. The warranty is only valid upon presenting the receipt
showing the seller store's name, the high-pressure washer model number
and the date of purchase.
The warranty does not cover wear and tear or defects arising from wear and
tear. The warranty will also become void if the product is used or stored at a
temperature below +0 °C. The warranty does not cover faults arising from in-
correct use of the product (such as using an incompatible detergent).
For warranty matters, please contact your Tarmo high-pressure washer seller.
Environmental protection
Please dispose of old devices and batteries or accumulators in an environ-
mentally friendly way.
Contact your local authorities for information regarding the collection sys-
tems available.